View source for 3D LightSquared DIY Kit 8x8x8 5mm White LED Cube Red Green Blue Squared Music MP3 Lamp (101-20-155)

==Tutorial on testing and assembling 8x8x8 light cube==
[[Image:3D cube 1.jpg]]
[[Image:3D cube 2.jpg]]
[[Image:3D cube 3.jpg]]
[[Image:3D cube 4.jpg]]
[[Image:3D cube 5.jpg]]
[[Image:3D cube 6.jpg]]
[[Image:3D cube 7.jpg]]
[[Image:3D cube 8.jpg]]
[[Image:3D cube 9.jpg]]
[[Image:10.1.jpg|500px|center]] 
[[Image:3D cube 10.jpg]]
[[Image:3D cube 11.jpg]]
[[Image:3D cube 12.jpg]]

==Introduction to key functions：==
*K1 key: enter the mode selection, day and night mode control
*K2 key: enter the 3D8 PC mode (after the boot to press the K1 key is valid)
*K3 key: to enter the 42 kinds of offline animation mode (after the boot to press the K1 key is valid)
*K4 key: enter 14 kinds of offline audio mode (after the boot to press the K1 key is valid)
[[Image:3D-key.png]]
[[Image:3D-key2.png]]

==Acrylic shell assembly:==
[[Image:第四步-外壳组装1.jpg]]
[[Image:第四步-外壳组装2.jpg]]
[[Image:第四步-外壳组装3.jpg]]
[[Image:第四步-外壳组装4.jpg]]

==Upper computer function & Burn the program introduction:==
[[Image:Upper1.png]]
[[Image:Upper2.png]]
[[Image:Upper3.png]]
[[Image:Upper4.png]]
[[Image:Upper5.png]]

8.You can download the [http://repository.sainsmart.com/index.php?share/file&user=bbu_sainsmart&sid=NmYlVcWS code] here,modify and compile programs by [http://repository.sainsmart.com/index.php?share/file&user=bbu_sainsmart&sid=DFRIJXaQ keil] ,then burn the program by [http://repository.sainsmart.com/index.php?share/file&user=bbu_sainsmart&sid=iVqfYHWS STC-ISP-V4.86].

First,choose the right MCU (STC12C5A60S2).

Second,open the file of .HEX .

Third,choose the right COM (Automatic Identification) .

Fourth,Start burning,when click 'ISP programming',at the same time press the power button twice, power off and then power on .

Note : Download the microcontroller when the need for cold start (meaning that the microcontroller needs to power off and then re-power to download), the power switch as a cold start on the line, download the device is connected to the need to disconnect the switch and then re-power can be downloaded, Host computer connection method (no cold start, do not dial the power cord and then plug), with the power cord directly on the line.

[[Image:Stc-isp.jpg]]

==Video==

Demo: https://youtu.be/rTE7zaZ17E8

Installation: https://youtu.be/m2bLBQPEYic 

==Resources==
[http://s3.amazonaws.com/s3.image.smart/download/101-20-154/CH341SER.EXE CH340G driver]

[http://repository.sainsmart.com/index.php?share/file&user=bbu_sainsmart&sid=aeDiumRM Upper computer-3D8S_Alpha]

[http://repository.sainsmart.com/index.php?share/file&user=bbu_sainsmart&sid=OCWDyZAX Light cube schematic diagram]

[http://repository.sainsmart.com/index.php?share/file&user=bbu_sainsmart&sid=yWsFnadA code]

[http://repository.sainsmart.com/index.php?share/file&user=bbu_sainsmart&sid=oFrMzNBl Code burning software]

[http://repository.sainsmart.com/index.php?share/file&user=bbu_sainsmart&sid=PptDasyZ STC-ISP-V4.86-NOT-SETUP-ENGLISH ]

[http://repository.sainsmart.com/index.php?share/file&user=bbu_sainsmart&sid=DWRJPelA STC-ISP-V488-english ]