Difference between revisions of "101-40-251"
From SainSmart Wiki
| Line 1: | Line 1: | ||
| − | #Hardware connection | + | #1.Hardware connection |
*Connect the camera to CSI interface of Jetson Nano.Set the metal side of FFC into Heat-sink | *Connect the camera to CSI interface of Jetson Nano.Set the metal side of FFC into Heat-sink | ||
*Connect a HDMI LCD to Jetson Nano | *Connect a HDMI LCD to Jetson Nano | ||
| − | #Software setting | + | #2.Software setting |
*Power on Jetson Nano and open the Terminal (Ctrl+ALT+T) | *Power on Jetson Nano and open the Terminal (Ctrl+ALT+T) | ||
*Test camera with command: | *Test camera with command: | ||
Revision as of 11:33, 23 April 2020
- 1.Hardware connection
- Connect the camera to CSI interface of Jetson Nano.Set the metal side of FFC into Heat-sink
- Connect a HDMI LCD to Jetson Nano
- 2.Software setting
- Power on Jetson Nano and open the Terminal (Ctrl+ALT+T)
- Test camera with command:
DISPLAY=:0.0 gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM), width=3280, height=2464, format=(string)NV12, framerate=(fraction)20/1' ! nvoverlaysink -e
- If you find that the image captured is red. You can try to download .isp file and installed:
wget https://www.waveshare.com/w/upload/e/eb/Camera_overrides.tar.gz tar zxvf Camera_overrides.tar.gz sudo cp camera_overrides.isp /var/nvidia/nvcam/settings/ sudo chmod 664 /var/nvidia/nvcam/settings/camera_overrides.isp sudo chown root:root /var/nvidia/nvcam/settings/camera_overrides.isp
