37 in 1 Sensor Module Kit

From SainSmart Wiki
Jump to: navigation, search

Description:

This is a set of 37 sensors ready to be connected up to a microcontroller, e.g. Arduino or RaspberryPi. A great package for Arduino experiments or as a basis for a larger project.

Item Picture Description
01 DS18B20 sensor module DS18B20 sensor module.png This module measures the temperature and reports it through the 1-wire bus digitally to the Arduino.
02 vibration switch module Vibration switch module.png This module is digital shock sensor. It will output a high level signal when it detects a shock event
03 Hall magnetic sensor module Hall magnetic sensor module.png This module can be used to detect the presence of an magnetic field. If there is an magnetic field present, it will report a high level signal.
04 key switch module Key switch module.png This is a button module. When the button is pressed, it will a high level signal.
05 infrared transmitter module Infrared transmitter module.png This is an infrared transmitter module that is used to emit infrared signal.
06 Passive Buzzer Module Passive Buzzer Module.png This is a nonactive buzzer module.
07 Laser-transmit Module Laser-transmit Module.png This is a laser emitter diode. The working voltage is 5V, with a wavelength of 650nm.
08 3 color - full color LED SMD module RGB LED.png This is a surface mount three-color LED module that can make any color we want by combing different intensities of Red, Blue and Green.
09 photo interrupter module Photo interrupter module.png This is a light block sensor module, where there is an object in the middle of the U shape. The sensor will output a high level signal.
10 3mm red and green LED (common cathode) module 3mm red and green LED (common cathode) module.png This is a dual color LED module.
11 Active buzzer Module Active buzzer Module.png This is an active buzzer module that can make different sound.
12 Analog temperature sensor Analog temperature sensor.png This is an analog temperature sensor that outputs it voltage in proportional to the temperature.
13 DHT11 Digital Temperature and Humidity Sensor Module DHT11.png This DHT11 Temperature and Humidity Sensor features a calibrated digital signal output with the temperature and humidity sensor complex,ensureing the high reliability and excellent long-term stability. A high-performance 8-bit microcontroller is connected. This sensor includes a resistive element and a sense of wet NTC temperature measuring devices. It has excellent quality, fast response, anti-interference ability and high cost performance advantages.
14 3 color - full color LED module 3 color - full color LED module.png This is a through the hole three-color LED module that can make any color we want by combing different intensities of Red, Blue and Green.
15 mercury tilt switch module Mercury tilt switch module.png A tilt switch that can turn on and off depending on the tilt position. The switch is mercury.
16 photoresistor module Photoresistor module.png Photoresistors are semiconductor photosensitive devices, in addition to having high sensitivity, fast response, consistent with the spectral characteristics and value of good features Under a high temperature, and humidity in harsh environments, it also can maintain a high degree of stability and reliability Wide pan used cameras, solar garden lights, lawn, detectors, clock, music, cups, gift boxes, mini-night light, light voice switches, lights automatically switch toys and a variety of light control, light control lighting, lamps and other light automatic opening control field
17 Relay Module Relay Module.png This is 1 channel relay module with the following spec:
  • Can be used as microcontroller development board module can be used as home appliance control
  • 5 V-12V to TTL control signal
  • The control signal DC or AC, 220V AC load can be controlled.
  • There is a normally open and one normally closed contact
  • A power indicator light
  • A control indicator, pull off, disconnect does not shine
  • Aransistor drive to increase the relay coil control pins high impedance.
  • A control pin has a pull-down circuit to prevent malfunction relay vacant
18 tilt switch module Tilt switch module.png Tilt switch module and a digital interface, built-in 13 LED build a simple circuit to produce tilt warning lamp 13 comes with digital interfaces of the LED, the tilt switch sensor interface to access digital 3,when the tilt open Off sensor senses a key signal, LED lights, otherwise off.
19 MINI reed switch module MINI reed switch module.png Reed module and the interface comes with digital 13 LED build a simple circuit to produce a Reed warning lamp 13 comes with digital interfaces of the LED, the Reed sensor access number 3 interface, when Reed sensors Sensed a key signal, LED lights, otherwise off.
20 Infrared remote control module Infrared remote control module.png This is the infrared receiver module, with the following features:
  • The infrared receiver module is 1838 Infrared receiver
  • Acceptance angle: 90 °,
  • Operating voltage: 7-5.5V.
  • Frequency: 37.9KHZ,
  • Receiving distance: 18Meter.
  • Using inside and outside the double-shielded package structure
  • Anti-light, electromagnetic interference capability, built-in infrared dedicated IC Can in 500 LUX Light intensity to work properly.
  • Widely used in: stereo, TV, VCR, disc players, set-top boxes, digital photo frame, car audio, remote control toys, satellite receiver, hard disk player, air conditioners, heaters, fans, lighting and other household appliances.
21 PS2 game joystick axis sensor module PS2 game joystick axis sensor module.png On the principle, the control rod can be considered that it is organized by the two potentiometer and a button.When using, it can connect with Arduino sensor shield,and connect Arduino corresponding pins through Arduino sensor cables. It as the following spec:
  • Directional movements are simply two potentiometers - one for each axis
  • Compatible with Arduino interface
  • The biaxial XY Joystick Module KY-023 applies ARDUINO
  • Dimensions: 1.57 in x 1.02 in x 1.26 in (4.0 cm x 2.6 cm x 3.2 cm)
  • 5 Pin
22 Linear Hall magnetic module Linear Hall magnetic module.png Linear Hall magnetic module and a digital interface, built-in 13 LED build a simple circuit to produce a magnetic field warning lamp 13 comes with digital interfaces of the LED, the linear Hall sensor magnetometer access number 3 interface, when linear Hall magnetometer Sensor senses a key signal, LED lights, otherwise off.
23 Reed module Reed module.png Reed module and the interface comes with digital 13 LED build a simple circuit to produce a Reed warning lamp 13 comes with digital interfaces of the LED, the Reed sensor access number 3 interface, when Reed sensors Sensed a key signal, LED lights, otherwise off.
24 flame module Flame module.png Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive
  • 60 degree detection sensor
  • Two outputs mode:

AO: analog output- real-time output voltage signal on the thermal resistance

DO: when the temperature reaches a certain threshold- the output high and low signal threshold adjustable via potentiometer

  • Working voltage: DC 3V - 5.5V
25 Magic light cup module Magic light cup module.png This module has two parts - an LED and a mercury tilt switch. Pins are 1 G (ground), 2 + (5V power), 3 S signal and 4 L (LED.) If you wired up 1 & 2 to power, pin 3 (signal) will alternate between 5V (HIGH) and 0V (LOW) as you tilt the module. If you connect a current limiting resistor to L2, you can use it as a blinking LED.
26 digital temperature module Digital temperature module.png Digital temperature module and a digital interface, built-in 13 LED build a simple circuit, making the temperature warning lamp 13 comes with digital interfaces of the LED, the digital temperature sensor connected digital three interfaces, when the digital temperature sensor senses a key signal, LED lights, otherwise off.
27 5mm red and green LED module (common cathode) 5mm red and green LED module (common cathode).png This is a dual color LED module.
28 knock sensor module Knock sensor module.png Knock sensor module and a digital interface, built-in LED build a simple circuit to produce percussion flasher. Interface comes with digital LED, will knock sensor connected digital 3 interface, when percussion sensor senses measure to percussive signals, LED flashing light.
29 Infrared obstacle avoidance sensors Infrared obstacle avoidance sensors.png The Infrared sensors work by sending an infrared light with some frequency, and then detecting if some of the light has reflected back to the sensor. The most common ones have a digital output indicating if object has been detected. Many of them have the option to be enabled or disabled.
30 7 color flashing LED module automatically 7 color flashing LED module automatically.png 7 color flashing LED module automatically uses 5mm round high-brightness light-emitting diode which has the following characteristics:
  • Shape: Round LED 5mm DIP type
  • Working voltage: DC 3.0V - 4.5V
31 analog Hall magnetic sensor module Analog Hall magnetic sensor module.png Analog magnetic sensor module and a digital interface, built-in 13 LED build a simple circuit to produce a magnetic flash Makers.13 comes with digital interfaces of the LED, the analog magnetic sensor connected to the power board analog 5 ARDUINO Interfaces, when analog magnetic sensor to a signal, LED lights,otherwise the lights out.
32 touch module Touch module.png Metal Touch Interface module and number 13 comes with LED build a simple circuit to produce a touch cue lights 13 comes with digital interfaces of the LED, the metal touch sensor connected digital three interfaces, when a metal touch Sensor senses a key signal, LED ights, otherwise off.
33 High sensitivity sound detection module High sensitivity sound detection module.png For sound detection module has two outputs:
  • AO, analog output, real-time output voltage signal of the microphone
  • DO, when the sound intensity reaches a certain threshold, the output high and low signal

Module features:

  • There is a mounting screw hole 3mm
  • Use 5v DC power supply
  • with analog output
  • there are threshold level output flip
  • high sensitive microphone and high sensitivity.
  • a power indicator light
  • the comparator output is light
34 Microphone sound detection module Microphone sound detection module.png Microphone sound sensor module KY-038 for Arduino:
  • LM393 main chip
  • Electric condenser microphone
  • Features Single channel signal output
  • Low level output signal used for sound control light
  • Great module for sound alarm system
  • Working voltage: DC 4-6V
  • Interface definition:
  • AO: analog output sensor
  • GND: ground
  • VCC: Power supply input range: 3V-24V.
  • DO: Digital Output (comparator output)
  • Two red LED indication: POWER and SENSOR. POWER: Power is off. SENSOR: When the microphone senses sound reaches a certain value, this LED light.
35 finger measuring heartbeat module Finger measuring heartbeat module.png This project uses bright infrared (IR) LED and a phototransistor to detect the pulse of the finger, a red LED flashes with each pulse. Pulse monitor works as follows: The LED is the light side of the finger, and phototransistor on the other side of the finger, phototransistor used to obtain the flux emitted, when the blood pressure pulse by the finger when the resistance of the phototransistor will be slight changed.

We chose a very high resistance resistor R1, because most of the light through the finger is absorbed,it is desirable phototransistor sensitive enough.Resistance can be selected by experiment to get the best results. The most important is to keep the shield stray light into the phototransistor. For home lighting that is particularly important because the lights at home mostly based 50HZ or 60HZ fluctuate, so faint heartbeat will add considerable noise.

36 Tracking Module Tracking Module.png The working voltage of 5V, black line output low level, white line output high level.
37 Rotary encoder module Rotary encoder module.png By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer counter, which species rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0.

How it works: incremental encoder is a displacement of the rotary pulse signal is converted to a series of digital rotary sensors. These pulses are used to control angular displacement. In Eltra angular displacement encoder conversion using a photoelectric scanning principle. Reading system of alternating light transmitting window and the window is not consisting of radial indexing plate (code wheel) rotating basis, while being an infrared light source vertical irradiation light to the code disk image onto the receiving on the surface. Receiver is covered with a diffraction grating, which has the same code disk window width. The receiver's job is to feel the rotation of the disc resulting changes, and change the light into corresponding electrical changes. Then the low-level signals up to a higher level, and generates no interference square pulse, which must be processed by electronic circuits. Reading systems typically employ a differential manner, about the same but the phase difference of the two waveforms different by 180°compared to the signal in order to improve the quality and stability of the output signal. Reading is then the difference between the two signals formed on the basis,thus eliminating the interference.

Resources

Code for arduino and raspberry pi